Even if an old driveway is in place, it is often better to install asphalt paving directly on top of the soil or a new laid leveled gravel base. You will get better results when you prepare the working area removing old driveway material and hauling it off, or removing all plant material from the fodder that will be paved.

When you want to have an inset driveway, it is common practice to dig the foundation or mold first. Dig the path for paving deep enough to accommodate not only the asphalt, but also the gravel base on the bottom base where the asphalt will be poured.

It is professional procedure for asphalt paving to be placed on top of a level gravel base. This base should be between 2 to 8 inches in depth. Standard roadway gravel tends to permeate well for this part of the job.

We generally recommended you employ the services of a professional laying the asphalt. Hot-mix asphalt requires specialized industrial machinery to mix and lay. The temperatures required to keep the mixture fluid enough for forming are a little much to handle without expert help.

When selecting a contractor for the asphalt paving job, make sure to:

• Obtain Multiple Quotes
• Check Backgrounds
• Carefully Prep The Work Area Completely Prior to The Contractor’s Arrival

Keep in mind, when laying asphalt paving, humidity in the weather can play a big role. A day without rain and sunny is obviously the best. The optimal outside temperature should be 70 degrees Fahrenheit or higher.

Before asphalt paving is ready for use, it will need appropriate drying and setting in place time. The time involved can vary greatly based on weather humidity conditions. The actual installation can take under a half-hour if the conditions are optimal.

While asphalt paving is not an average do-it-yourself job, certain phases can be handled in-house. However, it is often recommended that you hire an experienced contractor for all work including the prior preparation to create optimal conditions.